When we already have a flood watch, and now warning, please don't have City staff fill up their Vacall water trucks with a hydrant without a tight seal, spraying water for a long period of time and creating even more of a wet flooded mess for the yard.
Small (~7" diameter) metal access cover (valve down there?) labeled "Water" in the middle of 10th street on the east side of the intersection with Dunn is damaged, completely missing the central portion of the lid and creating a hazard if someone steps in it or a small animal falls in. There is also another one with nearly an identical problem (or completely missing) about 50 feet west at the intersection of 10th and a funny little road named "Prow".
Drainage at 820 w rosewood gets clogged constantly. 6 neighbors assist in removing debris Was informed the city “should “ take care of this. It isn’t. 2 when fiber came in and ATT no longer need the piller type boxes in yards. They are sitting abandoned in yards can the city require them to be removed? They should be since no longer needed. 3. I had spent about 50$ for grass seed and topsoil when I removed shrubs. With the laying of fiber this was dug up and this area is a mess.
I tripped on this manhole cover and am worried that someone else may do the same. Is there anything that can be done to mitigate a potential future issue?
Recent floods have left a ton of grit, sticks, and gravel in the road here
Flooding down Brownridge is starting an erosion hole again the road side with a drop of about 3 ft. from the road bed. A short load of stone (2-3 yds maybe) added to the previous should solve it; the last treatment has remained stable and has worked well.
There is a road drain across the street from me, North side, and I notice the drain there has the beginnings of cavitation, which if it goes, could be dangerous
At the corner of High St. and Maxwell there is water leaking from the fire hydrant
Water running down High Street from Maxwell South since last night, still running
The utility manhole covers in the Northbouand lane of Walnut Street from Miller Drive to Grimes are below the pavement level and need to be raised to pavement lever. This condition has existed since Walnut Street was re-paved years ago. Please fix. Thank you