This street is often used as a cut through for drivers who want to avoid the intersection of Rogers and Patterson, is it possible to get speed bumps on this street to prevent the excess of vehicles that speed through our neighborhood to beat traffic?
Hi - is there any chance of getting ramps and crosswalk to join these two multiuse paths? I bike these two paths all the time (coming and going from northwest of this point) and would really like to cross here rather than other places.
Please paint the new speedbump on rogers bright yellow or with stripes. I do not think that the signs are visible enough, especially at night.
Cherokee Drive, previously a dead end road, has recently opened up to the new neighborhood attached to RCA park. With the opening of the road, we are seeing increased traffic and that traffic is often traveling at speeds far exceeding the speed limit and what is safe, especially considering there are not sidewalks so pedestrians are forced to walk on the road. I’m requesting mechanisms be added to limit speed, like speed bumps, etc. to reduce risk.
When driving westbound on Grimes, if another car is already at the intersection, you cannot see lane markers to know which lane is straight vs left turn only. I have seen this cause several near-misses and I myself sometimes can't remember because there are no indications until you're right at the point of needing to turn or go straight.
Hello. Please consider adding "Do Not Block Intersection" style markings to the pavement at the entrance to the Park South apartments on Henderson Street (see attached file indicating where). This entrance is frequently blocked by cars stopped at the Hillside Drive intersection, making entrance and exit impossible and/or unsafe.
Cherokee drive is now a through street to Osage place and already drivers are driving too quickly down the hill. I'm requesting that a traffic calming bump be installed somewhere in the new Osage place Cherokee Drive. Thanks for keeping our narrow street safe.
The light at 2nd and Patterson needs a longer left turn signal, going from Patterson onto 2nd street. The time of the turn light is way too short. This has been a problem for years. I was the 6th car back in the turn line this morning and had to wait THREE LIGHT CYCLES to even make it through. Please make it a turn signal longer. Thank you!!!!!!!!!!!!!!
Westbound traffic on E Hillside congests at the S Walnut and E Hillside traffic light, which often causes backups and results in traffic blocking the E Hillside and S Washington intersection. Can there be a “do not block intersection” or one of the roadway painted Xs placed at that intersection? This has happened to me numerous times, and I get frustrated and honk, and E Hillside drivers either ignore me, or give me a mean look like this was my fault when they’re blocking the roadway.
Vehicles driving east on Grimes often stop in the middle of the road (rather than in their "lane") at the stop sign at Woodlawn. This makes it impossible to turn onto Grimes from Woodlawn until they have moved on, leading to difficult and unpredictable traffic situations. Would it be possible to put a center line here on Grimes, just for the intersection and the approach to it? To encourage drivers on Grimes to be in their lane when they stop at the intersection.