Please have the city traffic software programmers review this signal's program. It is basically ignoring the street sensors for westbound traffic on Hillside.
There are two potholes in the cross walk leading from Templeton Elementary to The Feast, intersection of Hillside and Henderson.
Unable to avoid a very deep hole due to oncoming traffic. It busted my tire and I became stranded.
The double yellow line on Henderson just south of the Hillside intersection meaners all over the road. While this is mostly an aesthetic issue, the line veers to the west right at the south side of the intersection with Hillside. This narrows the road for southbound traffic on Henderson to the extent that southband vehicles routinely must cross the double yellow line to avoid hitting cars parked on the west side of Henderson. I think this section of double yellow line should be repainted several feet to the east.
Eastbound left turn light is always activated even if there is no left turning traffic, so westbound traffic has to wait to continue straight
For several days, it has been impossible to activate the pedestrian walk signals for the crosswalk across 10th St on the west side of the 10th and Jordan intersection. After pressing the button on either side of the crosswalk, the Walk signal never activates through multiple cycles. The small red lights above the buttons remain illuminated.
There are 3 large potholes at the intersection of S Rogers St and Phyllis Ct.
There are two pot holes in front of 523 Winslow Farm Drive, which need filled.
Street light is out.