closed #161952
Traffic Signals
- Case Date:
- 12/5/2017
nw pedestrian crosswalk light is burnt out
nw pedestrian crosswalk light is burnt out
RRFB at allen&walnut doesn't work - northbound traffic does not yield. Went through twice on bike at about 9:30-10AM today (June 18), activated the beacon, and both times, SB traffic yielded and NB did not *at all*. I did not investigate the flawed design - that's planning&transportation's job.
The light on Walnut St at Hillside facing south is going red for long periods with no turning traffic
Sensors not working. Stays green for Pete Ellis for 30 sec even when no cars.
traffic signals at college mall rd & covenanter drive and college mall rd & buick cadillac blvd used to blink yellow on college mall rd before 6am. now the signals are always on and often result in red lights on college mall rd when no traffic is present on cross streets. can we have the blinking yellow lights back please?
Traffic light timing is off on Walnut between 3rd and 10th street. If you start at a red light at 3rd street, when the light turns green you will be stopped again at 5th Street if you travel faster than 12 mph. The lights at 6th and 7th turn green almost simultaneously.
blinking red lights
Missing street name signs, and knocked over school zone sign. The school sign I straightened as much as possible but it seems to be just stuck in a dirt hole. So leaned again right away.
The left turn arrow for southbound Walnut Street at Hillside Drive is activating even with no traffic in the lane. Stays on for a full left turn cycle.
A screw is off behind the pedestrian walk button.