Case Date:

1/29/2025

Pot holes

Case Date:

1/28/2025

The streetlight on the southeast corner of 9th & Morton is out making this corner very dark in the evenings. I submitted a request for repair to Duke Energy who came out but found this was not one of their lights. Thank you.

Case Date:

1/28/2025

No water pressure for 3 weeks. 750 s water st. Maple court lot 91

Case Date:

1/28/2025

The south east corner of the intersection of Kirkwood and Washington. The curb cut is covered with snow. The city seems to just be winning for everything to melt, but meanwhile it’s very difficult for people with wheelchair to get around. This is an accessibility issue. Please flag Michael Shermis.

Case Date:

1/28/2025

Street name sign, corner of Kingston Dr. & E. Longview Ave. Needs replacement. It is bent and I cannot image how it occurred except a bus or truck making the turn too tight.. Thanks -

Case Date:

1/28/2025

Not sure what the possible glitch with lyft is, but if the city is picking up the tab for rideshare rides after the first dollar then the city is being fleeced BIG TIME. I am giving $45 rides that go 4 blocks at times and the riders are laughing that they paid a dollar. Just an FYI no need to contact me just dbl check the program parameters before it's bankrupt

Case Date:

1/28/2025

Cara parked on both sides of the street, where construction work is about to begin, this is a hazard for both pedestrian and vehicles going down through this street. Larger trucks will not be able to move through

Case Date:

1/27/2025

The wheelchair accessible van parking spot on Morton at eighth Street is where I usually park to attend CCA meetings. Ironically, it is filled with snow. The snow plows seem to use the accessible parking spaces as snow storage spots. Unacceptable and inaccessible!

Case Date:

1/27/2025

There’s a deep pothole in the road outside of the end of my driveway.

Case Date:

1/27/2025

Our water pressure has been slightly less for about a week or so, is this normal? or is it a local issue? The water functions ok, but seems to be only about 3/4 the usual water pressure.